What is Dirty Electricity?
Dirty electricity is a dangerous form of electrical pollution that is invading our homes. Until recently, this phenomenon has largely escaped the attention of the general public and medical communities. Now emerging scientific research strongly suggests that poor quality of electric power may be making many of us sick.
Most of us assume that the danger from electricity is confined to the electrical wires in our homes, schools and workplaces, but in fact it’s becoming increasingly contaminated with invisible microsurges of dangerous radio-frequency radiation, now referred to as “dirty electricity” or “dirty power”.
The healthy human body resonates at about 10 Hz. The externally created EMFs of most concern are those that are very strong, near the body and those that are high frequency. External EMFs can change the frequency of your body’s electromagnetic fields through a process called entrainment (or sympathetic resonance). Entrainment is the tendency of an object to vibrate at the same frequency as something outside of it. In other words, powerful artificial EMFs overwhelm your body’s own electrical fields, changing their frequency and distorting the balance of the body’s electromagnetic field and its communication systems.
There is increasing evidence that ongoing and escalated exposure to EMFs can also result in electrohypersensitivity with a broad range of symptoms and potential illnesses. For a review of research related to EMF and health issues see The Bioinitiative Report 2012.
How do I Protect my Family from the Harmful Health Effects caused by Dirty Electricity?
Modern electronics like computers, big screen TVs and compact fluorescent lighting all introduce harmonics into the electrical circuits in our homes. These harmonics are a significant contributor to high EMF radiation levels. The result of these harmonics is commonly known as “dirty electricity” or “dirty power” and results in inefficiencies and electrical spikes that are potentially damaging to sensitive electronics.
The EMF Eliminator plugs directly into any electrical outlet (120 volt) and helps to optimize every electrical device plugged into that circuit. In other words, the EMF Eliminator will condition and regulate your electrical system in real-time. The delivery of clean power will consistently reduce heat, amps and consumption, as well as reducing the harmful effects caused by EMFs, electrical noise and negative harmonics.
The units come with a convenience outlet on the front so that no outlet space is lost. Common places to plug in this unit are: Kitchen, Home Office, Entertainment Center, Living Room, etc.
Residential homes are wired in single-phase electric power which is then divided into Phase A and Phase B. The circuits follow the pattern A, B, A, B, etc. (see illustration below) These will be labeled for specific rooms or appliances in your house in case you “pop a breaker” and need to flip the switch to turn the power back on. If your microwave is on a breaker labeled Phase B and your bedroom is on a Phase A breaker – simply plug one EMF Eliminator unit into the same outlet as your microwave and one unit into an outlet in the bedroom. As long as there is one unit on each of these split phases, your whole house will be covered! So, we suggest a minimum of 2 EMF Eliminators per home. In addition, we suggest you place another unit in an area of high electronic device concentration (Den, office, etc).
Two EMF Eliminators will cover a home or office up to 3,000 square feet. Uses a standard 120 volt outlet.
**Save 15% of f EMF Eliminator through 4/9/17 with promo code: DEblog
Good for single and double pack**
Watch the following YouTube demonstration how the Satic EMF Eliminator can reduce EMF radiation:
**Save 15% off EMF Eliminator through 4/9/17 with promo code: DEblog
Good for single and double pack**